|
HP2200 |
  
|
|
HP2200 |
|
HP2200
Hewlett Packard 3-Tray 2200 LaserJet
Configure the Printer making the Top Tray the Standard Tray
-----------------------------------------------------------
*) From Windows, Choose Start, the Programs, then HP LaserJet 2200 then
select Tools. From the Tray Setup tab put a check next to tray 2 and
tray 3. This will grey-out the lower two paper trays.
Set up a Tray One in Shop-Pro
-----------------------------
*) Go into Jewelry Shop-Pro. Choose Printer Control Codes (Choice 8,A).
Press Esc to add a new printer. Highlight an existing HP LaserJet entry
on the list and press Enter. Name the duplicate printer "LaserJet2200
Tray 1" and leave the Printer Port as-is or type another port if needed
*) In the Printer Control Codes menu, select the Clear-All code
and change the code 027,069,027,038,108,051,072
*) Change the Select Paper Tray code to 027,069,027,038,108,051,072,
*) Change the Deselect Paper Tray to 027,069
Set up a Tray Two in Shop-Pro
-----------------------------
*) Go into Jewelry Shop-Pro. Choose Printer Control Codes (Choice 8,A).
Press Esc to add a new printer. Highlight an existing HP LaserJet entry
on the list and press Enter. Name the duplicate printer "LaserJet2200
Tray 2" and leave the Printer Port as-is or type another port if needed
*) In the Printer Control Codes menu, select the Clear-All code
and change the code 027,069,027,038,108,049,072
*) Change the Select Paper Tray code to 027,069,027,038,108,049,072,
*) Change the Deselect Paper Tray to 027,069
Set up a Tray Three in Shop-Pro
-------------------------------
*) Go into Jewelry Shop-Pro. Choose Printer Control Codes (Choice 8,A).
Press Esc to add a new printer. Highlight an existing HP LaserJet entry
on the list and press Enter. Name the duplicate printer "LaserJet2200
Tray 3" and leave the Printer Port as-is or type another port if needed
*) In the Printer Control Codes menu, select the Clear-All code
and change the code 027,069,027,038,108,053,072
*) Change the Select Paper Tray code to 027,069,027,038,108,053,072,
*) Change the Deselect Paper Tray to 027,069
Select Trays For Each Print Job in Shop-Pro
-------------------------------------------
*) Go to the Printer Redirection Feature [Choice 8,B]. Note the
printer number assigned to the printer called: "LaserJet2200
Tray 1" (and Tray 2 and Tray 3)
*) Press <Esc> to get to "Customize Printing Destinations"
screen. Type the appropriate printer number (from the step above)
to each print job to be redirected to each tray.