HARDWARE > PRINTERS > HEWLETT PACKARD > JETDIRECT

POSJET2.CFG

Alternative POSjet 1000 codes

-----------------------------

+) Verify that your PosJet's Emulation is "Ithaca PcOS"

+ See the POSjet Quick Reference sheet for instructions on checking

or changing the "emulation" setting by using the "configuration" mode

Note: Newer versions of Shop-Pro automatically have a POSjet entry

in the internal printer list so you may not need to add a new entry

if you see one. If you see more than one then the "POSjet Draft Darker"

is recommended.

*) From Shop-Pro choose 8,A. Press Esc. Answer Yes. Highlight BLANK PRINTER

CODES. Name the printer POSJet 1000. Choose 0 to save your work

*) Choose 8,A. Go to the END of the list (note the printer number).

Select the new POSJet 1000.

*) If you make changes - make a note of your previous settings in case

you have to put them back

*) Make Compressed read: 027,073,048,015,027,086,001,027,069,001

Expanded read: 027,073,048,027,087,051,027,099,049,027,086,005

Cancel Expanded: 027,087,048,027,099,048,027,086,001,027,073,048

Clear All: 027,099,048

Cut: 027,099,049

Any other codes are blank

Choose 0 to choose "Return to Previous Menu and Save Changes"

*) Choose 8,B. Press enter and esc. Make the 40 column printer the

printer number for the new POSjet 0100

*) To add more or few lines of feeding between receipts, choose 8,8

"store information defaults" and on page 15 locate the option

"Number of lines to feed paper after receipts" and increase or

decrease

*) If you have a cash drawer connected by a phone connector to

the POSjet, go to approx page 15 of Store Information Defaults

and for the cash drawer ASCII code type 027,120,001