Navigation:  REPORTS > Extended Detail Inventory Report >

2.Make Selections

Previous pageReturn to chapter overviewNext page

 

This screen allows you select which items should appear on the report.

 

Options 1 through 7 are used to select the components that must be in the items you are looking for.

 

When selections have been made, select options 8 and 9 to begin the report. To run the report for all inventory items, just choose whether to display or print then choose Start Report.

 

To change the selection on an option, use the <↑> and <↓> keys to highlight the option, and press <Enter>.

 

For Major Class Codes*} Use this option to restrict the selection to items from one major class code only, or a range of major class codes. To choose items from just one major class code, enter the major class code as both the starting and ending major class code. If nothing is entered, ALL major class codes will be reported.

 

For Minor Class Codes*} Use this option to restrict the selection to items from one minor class code only, or a range of minor class codes. To choose items from just one minor class code, enter the minor class code as both the starting and ending minor class code. If nothing is entered, ALL minor class codes will be reported.

 

Major Stone Material*} To restrict the selection to only those items with a specific major stone type, enter that stone material. If you don’t choose this option, items with any major stone material will be reported.

 

Number of Major Stones*} To restrict the selection to only those items with a specific number of major stones, enter that number. If you don’t choose this option, items with any number of major stones will be reported.

 

Side Stones Material *} To restrict the selection to only those items with a specific major stone type, enter that stone material. If you don’t choose this option, items with any stone material will be reported.

 

Number of Side Stones*} To restrict the selection to only those items with a specific number of major stones, enter that number. If you don’t choose this option, items with any number of major stones will be reported.

 

Type of Precious Metal*} To restrict the selection to only those items containing a specific type of precious metal, enter that metal type here. If you don’t choose this option, items with any type of metal will be reported.

 

Display, Print, Wide, or Compressed*} The report can be displayed on the screen or printed on the printer. If the report will be printed, you can print on regular size paper or, if you have one, you could print on a wide-carriage printer that has room to print more detail. The wide report can also print the same detailed report on a standard-size printer by using small (compressed) characters. To change this selection, highlight the option and press <Enter>.