Navigation:  INVENTORY > Enter Existing Inventory >

6. End Entry for Location

Previous pageReturn to chapter overviewNext page


When all items for the current location have been entered, end entry for the location by leaving the SKU NO. field blank and pressing <Enter> twice or pressing <Esc>. If you press <Enter> twice the following message will appear:



                    Do you want to quit? Yes No  <Esc>=Quit




Press <Y> to end entry for the current batch, or <N> to continue entry.


Next you will be asked if you want to print tags for the items you just typed in



               Do you want to Print Tags now? Yes No  <Esc>=Quit




If you press <Y>, return to step 2 to type a new location code, or press <Esc> to return to the menu. If you choose not to print the tags right away, be sure to write down the Assigned PO# (the number with the ‘#’ in front of it located at the bottom right corner). This number will group all the items entered in the current session together. If tags are to be printed for the group later, use the ‘Assigned PO#’. Note that the ‘#’ is part of the number and you need to enter it along with the rest of the number if you later need to type the P.O. number.